内蒙古某含银铅锌矿工艺矿物学研究

内蒙古某含银铅锌矿主要含有铅、锌、银、铜、硫等有价元素,对该矿进行系统的工艺矿物学研究,查明矿石的矿物组成、结构与构造,目的矿物的嵌布特征、嵌布粒度、赋存状态等,为制定选矿工艺流程提供矿物学依据。     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.     

高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

不同类型断层控制油气垂向富集的差异——以渤海湾盆地歧口凹陷歧南斜坡区为例

渤海湾盆地历经多期构造变动，断层圈闭发育普遍。断层作为断层圈闭的边界条件，在油气成藏过程中起着至关重要的作用。以断层圈闭较发育的歧南斜坡区为例分析了同向断层和反向断层控制油气垂向富集的差异，基于三维地震资料，从断层形成过程和断层圈闭分布出发，剖析了断层遮挡圈闭的成因及分布规律。结合油水分布规律，基于油藏解剖并应用储层定量荧光技术明确了不同类型断层控藏的差异及其形成机理。研究表明：①断层分段生长作用和断层上盘与下盘的差异活动是同向断层控制下断层遮挡圈闭形成的主要原因，斜坡区反向断层控制形成的断层圈闭则是断块掀斜翘倾作用所致；②同向断层圈闭发育在断层上盘分段点位置，只有当同向断层进入"硬连接"阶段方可形成断层圈闭，反向断层圈闭形成在断层下盘，在反向断层活动初期便可形成；③同向断层既可以控制油气在多套含油气系统中聚集成藏，也可在一套含油气系统中富集，而反向断层往往控制油气在一套含油气系统中富集；④不同类型断层控制油气垂向聚集的差异与圈闭发育位置以及断-盖配置有关。采用泥岩涂抹系数对沙河街组一段中部盖层控制的含油气系统的垂向调整进行定量评价，泥岩涂抹系数低于3.5时油气保存，泥岩涂抹系数高于3.5时油气垂向渗漏。     

Study on the long-term behaviour of glass fibre in the tensile stress field

Glass fibre is a random network structure composed of [SiO₄] tetrahedra. The structure contains a large number of defects, which act as crack initiation points. Under tensile stress, cracks undergo crack initiation, stable propagation, failure propagation, and fracture, and the stress that begins after unstable propagation is called the critical fracture stress. When the stress is less than the critical value, the crack is subject to the force of chemical bonds during the crack propagation process, and crack arrest occurs. When the stress is greater than the critical value, the glass fibre will undergo destructive fracture. In this paper, long-term tensile tests were carried out on glass fibre and a glass fibre composite under different constant tensile stress conditions. The fracture times of the glass fibre and glass fibre composite under different tensile stresses were obtained, the critical fracture stress of glass fibre was inferred, and the fracture mechanism was explained.     

Monolithiation of 5,5′‐Dibromo‐2,2′‐bithiophene Using Flow Microreactors: Mechanistic Implications and Synthetic Applications

The lithiation of 5,5′‐dibromo‐2,2′‐bithiophene with one equivalent of an alkyllithium such as n‐BuLi or s‐BuLi was studied by varying the residence time in flow microreactors. With a short residence time, the product 2,2′‐bithiophene (3) derived from dilithiation was obtained preferentially and a significant amount of the starting material 5,5′‐dibromo‐2,2′‐bithiophene remained unchanged. An increase in the residence time caused a higher yield of the product 5‐bromo‐2,2′‐bithiophene derived from monolithiation with expense in the yields of 2,2′‐bithiophene and 5,5′‐dibromo‐2,2′‐bithiophene. The lithiation using MeLi gave the product 5‐bromo‐2,2′‐bithiophene preferentially even with a very short residence time.     

Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms

Nacre-inspired laminated composites have been proven to possess a unique combination of strength and toughness. In this study, we fabricated nacre-mimetic Cu/TiC composites via unidirectional freezing of aqueous TiC slurries containing different amounts of NiO additives, followed by ice sublimation, carbothermal reduction of NiO to Ni during sintering and then gas-pressure infiltration of the Cu melt. The introduction of Ni greatly facilitated the densification of ceramic lamellae and enhanced the interfacial bonding between Cu and TiC. The resultant composites displayed outstanding damage tolerance and anisotropic electrical conductivities. Specifically, for an ～31?vol% TiC–Cu composite containing 24?wt% Ni in the ceramic lamellae (based on the TiC content), a fracture toughness (K_Jc) of 72.5?±?1.0?MPa·m^1/2, work of fracture of 53.4?±?3.5?kJ/m², bending strength of 725?±?11?MPa and longitudinal electrical conductivity of 22.7?MS/m (～60% of the Cu matrix) were achieved, which were approx. 81%, 536%, 122% and 97% higher than those of the Ni-free composite, respectively. Noticeable toughening was demonstrated to be a consequence of multiple cracking, plastic deformation and uncracked-ligament bridging of the metal layers, as well as crack deflection and blunting. On the other hand, significant strengthening resulted from tailoring the microstructures in the ceramic layers and at the Cu/TiC interface as a result of Ni doping. We believe that the facile strategy adopted herein provides an effective way to solve the problems of wetting and bonding related to metal infiltration and can be readily extended to the preparation of other nacre-inspired metal?ceramic composites.     

Hydrolysis-resistant polyurethane elastomers synthesized from hydrophobic bio-based polyfarnesene diol

Hydrolytic stability is an essential requirement for polyurethanes (PUs) that are used in highly humid and aqueous environments. In this study, hydrolysis-resistant PU elastomers (PUEs) are synthesized based on hydrophobic bio-based polyfarnesene diol (PFD), which contains unique “bottle brushes” structure (with long branched hydrocarbon side chains). The effect of hard segment (HS) content, ranging from 30 to 50%, on the morphology and properties of PUEs is investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, tensile, water absorption, and contact angle measurements. The results show that there are prominent phase separations in the synthesized PUEs. The PUEs show a three-stage degradation process and two T_g, one is at about −66 °C and the other 61 °C, which are related to the soft segment and HS, respectively. Water contact angles of PUEs increase from 98.6 to 105.2° with the increasing of PFD structural unit fraction. After being immersed in deionized water for 30 days, PUEs show no significant degradation of both tensile strength and elongation at break, and mass changes of all samples are less than 0.5%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47673.